ClimaTek Furnace Blower Motor Replaces Carrier Bryant Payne HC45AE200 HC45AE200A
ClimaTek Furnace Blower Motor Replaces Carrier Bryant Payne HC45AE200 HC45AE200A. This is a new ClimaTek Furnace Blower Motor The Motor is 3/4 HP, 230 voltage, and 1075 RPM. It replaces the part numbers listed below. An electric motor converts electrical energy into mechanical energy. In an HVAC system, motors typically turn the air conditioning fan blade and the furnace blower motor. Newer high efficient motors, such as X13 and ECM motors, have end caps that control the motor speeds. These can be removed and replaced separately. Replaces Old Part #s. Partial List of Units that Use This Item. Hit Ctrl + F and enter your model number for a quick search!
Carrier Bryant Payne HK42FZ035 Furnace Control Circuit Board CEPL130456-01
Carrier Bryant Payne HK42FZ035 Furnace Control Circuit Board CEPL130456-01. Carrier HK42FZ035 – Control panel. Any product you return must be in the same condition you received it and in the original packaging. Please keep the receipt. We usually respond within 24 hours on weekdays. Thank you for shopping at our store.
Working OEM Bryant MN7 Carrier Hvac EF34CW154 Gas Valve with manifold assembly
Used but was in working condition when removed comes with the manifold as well for a 60k btu furnace. Came off Carrier MN7060 may fit other models.
Carrier Bryant Payne Hh72ch003 Model 990-141-1 Furnace Lockout Timer
THIS IS NEW IN A SLIGHTLY DISTRESSED BOX, OLD STOCK ITEM. THANK YOU FOR LOOKING AT THIS ITEM. Most of the items I sell have been in storage for several years. I’m not an expert on the usage or function of many of the items. Descriptions of the products were obtained from manufactures web sites and or catalogs. Items listed as NEW means the product has never been installed or used. NIB means the item is new and still in original box and OLD STOCK means the item has probably sat on the shelf for several years. DISTRESSED BOX means the box may show signs of service truck shelf wear, smudges, stains or other markings, print fading, label damage, etc, without any affect on the contents within. The items pictured are the actual items you will receive. In the case of a multiple item listing the picture may represent only one of what is offered.
Carrier / Bryant / Payne HK42FZ012 Furnace Control Board
Condition: Specify whether it is brand new / unused. Brand / OEM: Carrier (also compatible with Bryant, Payne). Model / Part #: HK42FZ012 (secondary / related #: 1012-943-A). Function / Role: This is an integrated furnace control board that manages system operations: ignition sequencing, blower motor control, safety interlocks, humidifier output, EAC (electronic air cleaner) interface, and more. It acts as the “brain” of the furnace, coordinating sensors, switches, components, and timing. Key Specs / Features (as known). Humidifier output: 24 VAC, up to 0.5 A. EAC output: 115 VAC, up to 1.0 A. Board size: 8″ × 7″ (approximate). Replaces older boards such as HK42FZ00. Used in many Carrier, Bryant, and Payne furnace models. Buyers should verify that their system wiring, sensor connectors, and mounting match the HK42FZ012.
Reconditioned Variable Speed Inducer Bryant Carrier HC23CE116 340793-762
Good used Bryant Carrier ECM motor HC23CE116 inducer assembly with a good wheel. Removed from a good working variable speed Bryant 90+ furnace. This is also used in the Carrier, Payne and others. I removed the motor cover and cleaned the dust from the cooling wheel and board. I inspected the board and found no bad solder joints, corrosion or water damage. The motor is in very good condition with good bearings. I opened the housing and inspected and cleaned the interior wheel. It is the newer black and gray style wheel and has no cracks developing, which is common with the older white or black/clear plastic ones. You can see the interior wheel thru the opening in the picture of the back. I inspected the housing inside and out and cleaned out all the gunk, including from the internal drain passageways. I even cleaned off all the old gasket material from the mating surface on the back so you will get a good seal. There are no cracks in the housing, all the plastic posts are intact and the seals are now new so it will not leak condensate. All the housing and motor screws are in place, none of them are missing or stripped out. I tested it on the bench when finished. It runs very well, gives the correct feedback signal and is ready to go. Please use the pictures to verify that the item is what you want. 320727-751 320727-752 320727-753 320727-754 320727-755 322550-702 324906-751 324906-752 324906-762 340793-762 320727751 320727752 320727753 320727754 320727755 322550702 324906751 324906752 324906762 340793762 5SME44JG2006D PHC23CE116. To ensure your safety, a professional technician should install this part and verify the proper operation of your equipment. I won’t waste your time. If anything is not right then just contact me with your solution.
Carrier HK42FZ045 Furnace Control Circuit Board CEPL131004-02
New never installed customer ordered wrong board The Carrier HK42FZ045 Furnace Control Circuit Board CEPL131004-02 is a crucial part for controlling your furnace, central air conditioner, or heat pump split system. Made of durable materials like fiberboard, plastic, and steel, this circuit board is designed to last. With its compatibility with various brands like Carrier, Payne, and Bryant, you can trust that this product will work seamlessly with your heating and cooling system. Proudly manufactured in the United States, this control board is a reliable option for maintaining your HVAC system’s performance.
HK42FZ045 Carrier Bryant Furnace Circuit Board CEPL131004-02
HK42FZ045 Carrier Bryant Furnace Circuit Board CEPL131004-02. Recovered from a working furnace that was decommissioned for upgrading. Specific furnaces ive recovered this part from. ICP m/n: N9MSE1002114A1. Please excuse all dust and dirt from prior use. Code for internal use only: F150.
Carrier Bryant HK42FZ062 Furnace Fan Control Circuit Board CEPL131004-20
Carrier Bryant HK42FZ062 Furnace Fan Control Circuit Board CEPL131004-20 Guaranteed working control board in excellent condition. See detailed images of actual control board you will receive in this listing.
Carrier Bryant HK42FZ036 Furnace Control Circuit Board CEPL131012-02 used
This part was removed by HVAC installer from a fully functioning system. Old system was replaced with new one and was in good working condition. The board was inspected by professional and was in excellent working condition when removed. Purchasing used parts you agree with the statement that sometimes hidden defects or malfunctions may occur during installation or continuous use. Most of the parts require specific knowledge and skills to be installed properly. If you don’t have skills or knowledge, you must ask certified HVAC technician to install.