Carrier Bryant Payne HC27CB119 JE1D013N Furnace Draft Inducer / Exhaust Venter
We offer a handpicked collection of high-quality items, available exclusively in the U. Check item specifics and photos to ensure you make the perfect choice. While we strive to offer detailed images, it’s not always possible to verify every aspect of the item. Therefore, we apologize if the product does not meet your expectations.
Furnace Draft Inducer/Exhaust Vent Venter Motor Replaces Carrier Bryant Payne
This is a Brand New Furnace Draft Inducer Motor? This is a Brand New Exhaust Vent Inducer Motor? This Part Directly Replaces Part # HC21ZE116 HC21ZE118 HC21ZE118B HC21ZE118-B? Top Quality Replacement Part, Built to Last! No Electrical Modifications or Adapters Needed? Works with many Furnaces!
Carrier Bryant Payne HC27CB119 JE1D013N Furnace Draft Inducer / Exhaust Venter
This Furnace Draft Inducer is a powerful exhaust venter that is compatible with Bryant, Payne, and Carrier models. This high-quality draft inducer is from a reputable brand Magnetek and is perfect for heating needs. Most parts require specific knowledge and skills to be installed properly. If you don’t have skills or knowledge, you must ask a certified HVAC technician to install. We are not liable for any damages or failures as a result of improper installation. If you have any questions, feel free to ask.
OEM Carrier Bryant Payne Furnace Exhaust Venter Inducer Replaces 337386-721
OEM Carrier Bryant Payne Furnace Exhaust Venter Inducer Motor 337386-721. This is a Brand New OEM Upgraded Carrier/Bryant/Payne Furance Draft Inducer Motor Assembly. This 2 speed motor is rated at 115 volt and 3030 RPM. It replaces the part numbers listed below. An inducer motor is designed to expel the exhaust gas from the furnace. Older inefficient furnaces allowed the flue gas to escape the unit with virtually no resistance. Newer high efficient furnace heat exchangers are so restrictive that the flue gases cannot exit the furnace though “natural draft”. Therefore, the inducer is required to pull the flue gases through the heat exchanger. The inducer motor is usually the first thing that starts up when your furnace calls for heat. Replaces Old Part #s. Partial List of Units that Use This Item. Hit Ctrl + F and enter your model number for a quick search!
326628-763 Furnace Draft Inducer/Exhaust Vent Venter Motor Fits Carrier Bryant
326628-763 – Furnace Draft Inducer/Exhaust Vent Venter Motor Fits Carrier Bryant Payne HC21ZE127A 326628-763. CLM Repl for Car # 326628-763. 8 x 8 x 8 inches; 4.8 Pounds. This is a Brand New ClimaTek Furnace Exhaust Venter Draft Inducer Motor. OEM Style Design and Easy Installation Make this a Top Quality Part! Direct for part # 326628-763, HC21ZE127A, & More. Designed for Carrier, Bryant, Payne, and Day & Night Furnaces! No Adapters / Electrical Modifications Required! This is a Brand New ClimaTek Furnace Inducer Motor. We offer the best prices around on high quality products. Our E-store includes media such as books, movies, music and games while offering electronics, toys, sporting apparel, clothing, tools, general home, garden items and more. We are always working hard to ensure your package arrives as soon as possible. We do not accept P. Please provide a physical address. We try our very best to make sure every customer is completely satisfied. If there’s a problem, message us! We’re happy to help. This item is in the category “Business & Industrial\HVAC & Refrigeration\HVAC & Refrigeration: Parts & Accessories\HVAC & Refrigeration: Fans & Blowers”. The seller is “ayelet_store” and is located in this country: US. This item can be shipped to United States.
- Item model number: CLM Repl for Car # 326628-763
- Product Dimensions: 8 x 8 x 8 inches; 4.8 Pounds
- UPC: 313030744760
- EAN: 0313030744760
OEM Carrier Bryant Payne Furnace 2 Stage Exhaust Venter Inducer Motor HC27CB121
OEM Carrier Bryant Payne Furnace 2 Stage Exhaust Venter Inducer Motor HC27CB121. This is a Brand New OEM Upgraded Carrier/Bryant/Payne Fasco 2 Stage Furance Draft Inducer Motor Assembly. The motor is 115 volt, 3200 RPM. An inducer motor is designed to expel the exhaust gas from the furnace. Older inefficient furnaces allowed the flue gas to escape the unit with virtually no resistance. Newer high efficient furnace heat exchangers are so restrictive that the flue gases cannot exit the furnace though “natural draft”. Therefore, the inducer is required to pull the flue gases through the heat exchanger. The inducer motor is usually the first thing that starts up when your furnace calls for heat. Replaces Old Part #s. Partial List of Units that Use This Item. Hit Ctrl + F and enter your model number for a quick search! This item is in the category “Home & Garden\Home Improvement\Heating, Cooling & Air\Central Heating & Cooling Systems\Central Furnaces”. The seller is “bluestang5″ and is located in this country: US. This item can be shipped worldwide.
- Brand: Fits Carrier Bryant Payne
- MPN: Fits HC27CB121
OEM Carrier Bryant Payne Furnace Exhaust Venter Inducer Motor HC27CQ102
OEM Carrier Bryant Payne Furnace Exhaust Venter Inducer Motor HC27CQ102. This is a Brand New OEM Upgraded Carrier/Bryant/Payne Furance Draft Inducer Motor Assembly. This 2 speed motor is rated at 115 volt and 3030 RPM. It replaces the part numbers listed below. An inducer motor is designed to expel the exhaust gas from the furnace. Older inefficient furnaces allowed the flue gas to escape the unit with virtually no resistance. Newer high efficient furnace heat exchangers are so restrictive that the flue gases cannot exit the furnace though “natural draft”. Therefore, the inducer is required to pull the flue gases through the heat exchanger. The inducer motor is usually the first thing that starts up when your furnace calls for heat. Replaces Old Part #s. Partial List of Units that Use This Item. Hit Ctrl + F and enter your model number for a quick search! This item is in the category “Home & Garden\Home Improvement\Heating, Cooling & Air\Central Heating & Cooling Systems\Central Furnaces”. The seller is “bluestang5″ and is located in this country: US. This item can be shipped worldwide.
- Brand: Fits Carrier Bryant Payne
- MPN: Fits HC27CQ102
Furnace Venter Exhaust Inducer Motor Fits Packard Carrier Bryant Payne 66649
Furnace Venter Exhaust Inducer Motor Fits Packard Carrier Bryant Payne 66649. This is a Brand New Aftermarket Direct Replacement Furance Draft Inducer Motor Assembly used for Carrier/Bryant/Payne Furnaces. The motor is 1/6 HP, 208-230 volt, and 3450 RPM. An inducer motor is designed to expel the exhaust gas from the furnace. Older inefficient furnaces allowed the flue gas to escape the unit with virtually no resistance. Newer high efficient furnace heat exchangers are so restrictive that the flue gases cannot exit the furnace though natural draft. Therefore, the inducer is required to pull the flue gases through the heat exchanger. The inducer motor is usually the first thing that starts up when your furnace calls for heat. Replaces Old Part #s. Partial List of Units that Use This Item. Hit Ctrl + F and enter your model number for a quick search! This item is in the category “Home & Garden\Home Improvement\Heating, Cooling & Air\Central Heating & Cooling Systems\Central Furnaces”. The seller is “bluestang5″ and is located in this country: US. This item can be shipped worldwide.
- Brand: Fits Carrier Bryant Payne Packard
- MPN: Fits 66649